How to setup local calls via line port (OBi110)

<< < (2/4) > >>

kenth:
Sorry, my bad.

I see the patterns "<**8>" is magically inserted on match before the call is routed. Cool.

Just what I needed.

Kent

RonR:
ITSPB would only be used if you set up another provider, such as one on VoIP or a second Google Voice account.

kenth:
Thanks.

BTW, could the pattern be simplified to just use "<**8>[2-9]x." as the first phrase & let the
telco switch sort it out?

RonR:
Placing a call is a two-stage process.

1. The dialed number is processed through the PHONE Port DigitMap, validating and possibly transforming the number.

2. The resulting number is processed through the PHONE Port OutboundCallRoute, routing the call according to the first rule that matches.

RonR:
Quote from: kenth on August 24, 2011, 11:54:30 am

BTW, could the pattern be simplified to just use "<**8>[2-9]x." as the first phrase & let the
telco switch sort it out?


I prefer validation over ambiguity.   :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page