Unable to register new OBI200 .
Dead_Cow:
Hey, I have the OBI setup properly. It has the correct IP, however, when I try to do the **5 4241, it never registers with my OBI account. I'm changing from an OBI110 to an OBI200. **9 200-200-200 works. Any ideas? I've tried putting the device in a DMZ to register. I have a Netgear 7000 (Nighhawk) router running the latest version of DD-WRT and have never had an issue.
drgeoff:
1. What exactly happens when you go through the **5 xxxx procedure?
2. I don't know what **9 200 200 200 is supposed to do. I do know it is not the echo test number.
Nick2:
I'm having the same issue. When I dial the **5 number it tells me the message has been sent to the server, the setup screen says "trying to connect your device" but times out after 120 seconds. The echo test numbers works just fine for me as well.
Dead_Cow:
Quote from: drgeoff on May 29, 2018, 03:21:21 pm
1. What exactly happens when you go through the **5 xxxx procedure?
2. I don't know what **9 200 200 200 is supposed to do. I do know it is not the echo test number.
Sorry, I meant **9 222-222-222, mistype. The echoback works.
When I do the **5 **** routine, it says it's been sent to the server, but the obitalk page times out and asks if I want to try again. The new device never appears in the obitalk page.
SteveInWA:
I don't know what's going on with your **5 failures, but just as a SWAG, you mentioned you're using a Netgear router and DD-WRT. There have been several other discussion threads where that appears to have been the cause of the problem.
If you have another router to experiment with, it would be worth swapping them.
Navigation
[0] Message Index
[#] Next page