Star code *69 not working anymore

<< < (3/3)

azrobert:
Quote from: dvddavid on July 13, 2018, 11:25:05 am

Only thing I noticed that weird is the CallerID display formatting on my phone. Calls to SP2 display CallerID on the phone as the full number no dash, while now calls to SP1 now only show xxx-xxxx, the last 7 digits no area code but with the dash.


I'm changing the CallerID on SP1 to 10 digits and SP2 to 11 digits, so I can understand a difference, but 7 digits doesn't make sense. Does your phone have an option how it displays different length CallerIDs?

lrosenman:
Some phones have a "Local Area Code" option that if the 10-digit number matches the area code it suppresses it.

dvddavid:
The phones I'm using are just basic Uniden cordless circa 2005 or so. I  don't remember any same area code display  settings, but in this case it wouldn't matter since the area code I'm calling from is different then the number anyway.

I'm not sweating it I have the call return functionality.

Thanks for all the help.

jemco:
Hello,
I am the original poster who requested use of *69.
My obi200 uses SP1 only. It does use SP2 for anveo 911 service, but I don't think that matters to this discussion.
Could someone please tell me what to do so I can get this to work?

I tried this:
Service Providers -> ITSP Profile A General -> DigitMap:
(<+:>1xxxxxxxxxx|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.S3)

But it didn't work and I really had difficulty following what was done with a 2 port obi and using that on my obi200.

Also, what was previously in that cell was this:

Service Providers -> ITSP Profile A General -> DigitMap:
(*xx|<+>1xxxxxxxxxx|<+1315>[2-9]xxxxxx|<+1>[2-9]xxxxxxxxx|<011:+>xx.|(Mipd)|[^*]@@.)

And I can't get my obi200 to save that text in the DigitMap now and also I was previously able to dial 7-digit numbers and the area code was not dialed. Now those calls do not work and all calls need the area code.

Thank you in advance for help with this.
Joe

jemco:
Okay,

I figured it out.

Here's how I got *69 to call back the last call on an OBI200:

This will fix *69 to SP1:
Voice Services -> SP1 Service -> X_InboundCallRoute:
{(<+:>1xxxxxxxxxx):ph1},{ph1}

Thank you,
Joe

Navigation

[0] Message Index

[*] Previous page