OBI200 Google Voice Setup Error "Registration Not Required"--What does it Mean?
SKIN:
SteveInWA and Taoman,
Thank you for your reply.
Now i tried all below steps in laptop which is in the same network as OBI device.
1. I tried connecting local web gui by typing IP address on browser.
2. I got Pop up asking for username and password.
3. I gave username and password as admin and admin. But it is giving me an error "401-Unauthorized".
4. I didn't change my password anytime and on my dashboard i still see my web admin password as "admin" but not sure why i am not able to access local web gui.
5. I tried clearing cache / cookies on browser and tried logging in IP address local web gui. but still no luck.
6. I tried ping test for the same IP address in windows command prompt. I got message with
Response time 50ms and sent packets 4 and received packets 4.
Please suggest what would be the solution in this case.
Thank you for your prompt response.
SteveInWA:
All righty then. It sounds like you have made some changes on the device which are causing this mess.
At this point, there's no telling what is wrong with the thing, so time for a complete do-over.
Follow all of these steps, in order, and do not skip anything.Sign into your OBiTALK dashboard. Delete the device completely off of the page...gone. Wait a few minutes.Unplug the phone, power and Ethernet cables from the device.Turn it upside-down on a flat, non-slip surface.Straighten out a paper clip. Find the small bump with a small hole it it, on the now-facing-up bottom of the device.Gently insert and depress the recessed reset switch underneath that bump. Hold it down; don't let go.Plug in just the power cord. Keep holding down the switch. Wait about 15 seconds. Remove the paper clip. Turn the device back over. Watch the three LEDs.Wait until it restores itself to factory defaults, which will take a few minutes. When the LEDs settle down, such that the left LED (power) is on steady and the middle LED is flickering, then unplug power again.Plug in all three cables. Wait for it to power up.Pick up the phone and key in ***1 and you should hear it read out a valid IP address, starting with either 192.168. or 10.0. If you do not hear an address like that, then STOP here and tell us what happened.If you do hear a valid address like that, then re-add the device to the OBiTALK web portal by performing the **5 xxxx procedure. Do NOT configure Google Voice yet. Was that successful, meaning, the device was added and it now has a green circle next to it on the OBiTALK dashboard?
SKIN:
Hi SteveInWA,
I executed all your mentioned steps in the same network as OBI Device.
I heard IP Address through phone and added device to OBI Talk Dashboard with **5 procedure.
Device addition is successful and i see GREEN status on OBI Dashboard. You can see attached screen print.
Hi Taoman, FYI.. My device is in Different Location ( In another country ) . I am executing all these steps in the same network as obi device with the help of my friend
Thank you.
SteveInWA:
...and, what other country is that?
SKIN:
SteveInWA.
OBI Device is in INDIA.
And i was using from INDIA only since Dec 2015 onwards without any issues.
Suddenly it stopped working.
Navigation
[0] Message Index
[#] Next page
[*] Previous page