Multiple OBI1022 no longer ringing right after support help
azrobert:
I can confirm that simul-ring does not work when a device is on an active inbound call and only the active device will receive subsequent calls. I did not test when a device is on an outbound call or when two devices are busy.
You can use Forward on Busy to route subsequent calls to another device. You would use the OBiTalk network to forward. There has been problems in the past with forward on busy, so you would need to test this. You would also have to test receiving multiple calls after the device is busy. This might not be the best solution for a business, but I thought I would give you the option. Let me know if you want to try this and I'll show you how.
Edit:
Ignore my post, Bill's solution is better.
billsimon:
Quote from: RGCWireless on June 07, 2018, 06:55:24 am
Quote from: SteveInWA on June 06, 2018, 02:37:22 pm
Just ignore the waiting call, and it will be sent to Google Voice voicemail after the usual ~25 seconds of ring time.
Does anyone have a recommendation on a replacement service that will behave the same way GV used to behave on the Obi?
I assume if you forward your GV to a CallCentric number and then register multiple SIP devices to that CallCentric account, it would do what you want.
GVGW will also do what you want through our multiple SIP registrations. Sign-ups are presently closed but may reopen soon.
Navigation
[0] Message Index
[*] Previous page