Trying to use OBI202 as a Proxy to GV from Freeswitch
statman:
I am experiencing this exact same issue at 24 seconds and have yet to find a resolution. Was anyone able to resolve this? Consistently, after 24 seconds Asterisk receives a SIP 503 back from my OBI200.
ubergoober:
No, I have not solved it. I have little time to go after it for now, but I will be back. Don't expect ANY help from OBI support on this. They are worthless. For instance, when I had difficulty with the time of day on my obi1062 being wrong, they tried to tell me it was because I was plugged into a POE switch. When I pushed back, their "Solution" was to initiate a warranty replacement. I did a factory reset on the phone, which fixed the problem. I got the same type of helplessness from them when I made inquiries about this topic. Again, worthless.
keouchao:
Having the same problem, and found a solution from Robert Stampfli (link https://cboh.org/voip/obi/OBi_As_ITSP.html ).
You need to enable X_EarlyICEEnablein from Obi web interface ITSP Provile -> General ->. following is from Robert's write up.
.. to enable X_EarlyICEEnableIn, and without this feature being enabled unanswered outbound calls will generate an error 503 after approximately 22 seconds of unanswered ringing,..
ubergoober:
Thank you! I'll give that a look.
ubergoober:
I finally cracked this nut! Posted my config in a new topic: http://www.obitalk.com/forum/index.php?topic=17797.0
Navigation
[0] Message Index
[*] Previous page