XMPP turn-off by GV
azrobert:
Quote from: livefortechnology on July 19, 2018, 11:13:07 am
EDIT: Should have clarified my several obi110's that have been ROCK SOLID for MANY years, even with the latest 3rd party oauth firmware, are apparently now paperweights unless I can figure out a way to use them with a different upstream GV SIP provider (that works now that XMPP is dead).
The process for adding an SIP GV trunk is the same as an XMPP GV trunk.
See for using your OBi110's:
http://www.obitalk.com/forum/index.php?topic=14451.msg92270#msg92270
You can define up to 4 GV accounts on a single OBi200.
Also:
http://www.obitalk.com/forum/index.php?topic=14463.0
A_Friend:
Depending on which version of firmware is on the out-of-the-box Obi200, there are either two options, or only one.
1) Use the Obitalk portal to configure Google Voice. This will also push the latest firmware onto the device. This is the recommended procedure, and is pretty painless on a brand-new box. It precludes you using (2), though.
2) If the firmware is old enough, you may be able to "upgrade" to a user-supported version of the firmware and directly get your credentials through Google. It's complicated, though. See the user-supported-firmware site at obifirmware.com.
Any recent version of factory firmware can not be overwritten with the user firmware. And if you go that route, I'm not sure what happens if you ever want to register your device to use the Obitalk portal. I mean, you'll be able to register it, but it will probably step all over your settings, overwrite your firmware and maybe force you to factory reset before you can reconfigure anything. And, in my experience, your backup file and aa prompts may not load back without some extra work.
SteveInWA:
Quote from: Taoman on July 19, 2018, 09:10:59 am
Quote from: drgeoff on June 18, 2018, 06:16:35 am
I know it is just a matter of time but as of 1310 GMT 18 June 2018 the GV trunk (Motif) on my Asterisk PBX is still working.
Is it working today for you?
It was taken off life support on Friday the 13th, appropriately enough. A job was run yesterday to purge any remaining "Google Chat" entries and related code.
drgeoff:
Unexpectedly my FreePBX GV trunk (Motif) is still showing as "connected". But any US number I dial gets the Google girl saying "We could not complete your call. Please try again." Even dialling my GV number does that, instead of accessing VM.
So XMPP between my PBX and GV servers is still working. It is the onward side that has been disabled.
nang:
Is there still a way to use OBI110 with GV or its brick now? I have been using with obifirmware.com for some time.
Is there a hardware difference between OBI110 and OBI200? If not, why OBI200 would work but not OBI110 if someone develops a firmware like obifirmware.com?
Navigation
[0] Message Index
[#] Next page
[*] Previous page