Setup for Line Interface - Holland/Netherlands/Nederland?

(1/1)

BigJake:
RonR just helped me with an initial dial plan (thanks), and I saw another older thread from a user needing to configure for the Spanish national line/PSTN standard.  I'd very much appreciate it if someone knows the settings for Holland.  I have a working SPA3000, but I set that up through trial-and-error many years ago.  If someone knows what works for the OBi, or has a link to the national PSTN standards for Holland I would appreciate it.

Thanks in advance.

OBiSupport:
Hi,

Please contact Obihai support at support@obihai.com, and state your 9-digit OBi number in the email, we like to assist you for the device setup in Holland.

Thanks,

Huib:
Hi BigJake, OBiSupport,

Can you share the specific settings for the LINE and PHONE port applicable for the Netherlands? I'm about to ship an OBi110 and would like to have it configured correctly before my parents lose their land-line service or rack up high bills because the line doesn't get disconnected.

Thanks!

Huib

BigJake:
This worked for me:


Country related settings (Holland)


       Physical Interface -- PHONE port

               Impedance                   270+(750||150 nF)

       Physical Interface -- Line port

               RingFrequencyMin              10
               RingFrequencyMax              100
               RingThreshold         13.50-16.50
               RingValidationTime      256

               ACImpedance                 270+(750||150 nF) and
275+(780||150 nF)
               DisconnectTonePattern   425-30;10;(.25+.25)
               OnHookSpeed                 3 ms (ETSI)
               MinOperationalLoopCurrent       12 mA
               CurrentLimitingEnable   Enable
               CallerIDDetectMethod    FSK(V.23)

       Tone Profile - B

               Dial tone                   425-18;20
               Ringback tone         425-18;-1;(1+4)
               Howling tone          425-3;10;(.25+.25)
               Busy tone                   425-18;10;(.5+.5)
               Reorder tone          425-18;10;(.25+.25)

       Ring Profile - B

               Ring pattern 1        60;(1+4)

Huib:
Awesome! Thanks for the quick reply  :)

Navigation

[0] Message Index