Connecting Panasonic IP phone KX-TGP600 with Obi202- in Proxy
jholme004:
Well, Almost....I can not receive calls now.
In SP1 (My set up is similar to yours), I have:
X_InboundCallRoute=sp3
That should do it, no?
lrosenman:
needs to be sp3(xxxxx) where xxxxx is the phone number assigned in the TGP. (I use 1001 for me and 1002 for my wife)
EG:
ph,ph2,SP3(1001),SP3(1877xxxxx@switch.starcompartners.com;ui=$1)
I send it to the phone ports since my Dish Hopper displays CallerID on my tv's
and the 1877 number is NoMoRoBo.
jholme004:
I tried that as well as sp3(2023@10.16.3.103),sp3(2023@10.16.3.103:5060), and sp3(2023@10.16.3.103:5062)
(AuthID in TGP=2023; TGP IP=10.16.3.103; TGP Local SIP Port=5062)
I've even tried changing the local SIP port in ITSPC > SIP from 5062 to 5060, incase the TGP only receives on 5060. Still no incoming.
I can receive the call on the analog port of the Obi or via FreePBX via the Obi, so I know the call is making it out of the OBi using other output methods.
I've attached my SP1 settings...VG1 is currently what I use for my FreePBX box, but I've tried the above with that removed.
lrosenman:
I'm at a loss, that was the only thing that jumped out at me.
I'd go over the diff's again on the TGP, as well as the logs from it if you can get them out.
I've sent a PM with contact info, feel free to contact me.
Navigation
[0] Message Index
[*] Previous page