Why do I get "....has not received a response from the service provider"?
tome:
Quote from: RonR on August 27, 2011, 12:03:23 pm
BTW, you can reverse the SIP User Agent Ports on the OBi such that SP2 will be listening on port 5060 instead of port 5061:
Voice Services -> SP1 Service -> X_UserAgentPort : 5061
Voice Services -> SP2 Service -> X_UserAgentPort : 5060
This will probably make it easier for others to call you without having to tack a port address onto your URI.
I like the idea of putting your DynDNS hostname in for ProxyServer. Please let me know if this all works out for your friend returning your calls.
Yes, the port number was the problem! It works if he calls FOO@BAR.dnydns.org:5061
I don't suppose sending the port number as part of the "callerid" info is part of the spec?
And thanks for the info on re-mapping the port numbers. I may or may not do this. I need to decide if I am going to get a "real" voip provider at all or just keep GV + sip2sip.info.
Can there just be an implied "many thanks!" in all my messages to you ;)
Tom
ps: Does Google Voice even care about the port number?
RonR:
Google Voice doesn't use SIP, so X_UserAgentPort isn't of interest on SP1. I don't think you'll see any problems reversing them (they're reversed here). Then you don't have to worry about port 5061.
The alternative is to put Google Voice on SP2 and your VoIP provider (real or dummy) on SP1. Just remember to change your PrimaryLine and review any references you've made to SP1, like {(Mcot)>(Msp1):sp1} in the OBiTALK Service InboundCallRoute.
tome:
There is also X_KeepAliveServerPort, should I change those as well?
Tom
RonR:
No, just the X_UserAgentPort setting.
tome:
Quote from: RonR on August 27, 2011, 11:37:20 am
It may be that sip2sip.info has a DNS SRV record that returns a different IP address than the DNS A record.
FYI - "dig" doesn't reveal any SRV records for the domain so I am not sure what is happening.
Tom
Navigation
[0] Message Index
[#] Next page
[*] Previous page