Auto Firmware update setting

(1/2) > >>

Patrick7:
My firmware crashed on an Obi200. I found a 5775EX firmware in the forums, which brought it back online, and seems to work, except for Google Voice. I know Polycom/Obihai and Google are going thru changes/upgrades so i suspect some of my GV issues are due to that. However, I do know that the latest firmware is at least 58xx,and would like to push an upgrade. I tried calling the ***6, (no upgrade available). Now I look in Obitalk,and auto firmware update is disabled,  and the drop down box is grayed out?  Is this a default setting?? I certainly didn't disable it.....

Thanks

drgeoff:
Use Expert mode on the portal (obitalk.com). Clear both boxes at the right hand end of the line. You will then be able to change the setting. Then click 'Submit' at the bottom.

Patrick7:
y question is "Should the Auto firmware update" be disabled??  How does it get updates if  Obihai is shutting off  this feature in Obitalk??

drgeoff:
Quote from: Patrick7 on June 20, 2018, 12:12:05 pm

y question is "Should the Auto firmware update" be disabled??  How does it get updates if  Obihai is shutting off  this feature in Obitalk??

I think Obihai can disregard that setting and do so if they consider an update is necessary.

In any case, given that the firmware needed to operate the latest incarnation of GV can only be obtained as a push from Obihai, I would enable the auto update.

bsdaiwa:
I have 8 OBi 200's and they have a mix of firmware's ranging from 3.2.2 (Build 5859EX), 3.2.2 (Build 5854EX) and 3.2.2 (Build 5829EX). I have enabled Auto Firmware update pointing to http://www.obihai.com/firmware/OBi2-latest.fw with Interval set to 86400 and after several days none of the units has updated to the latest firmware, nothing changed. Any suggestions?

Navigation

[0] Message Index

[#] Next page