Outgoing callers can't hear me
GPz1100:
^^What about LUA scripting from the auto provisioning page and obi talk service from the voice services?
Taoman:
Quote from: GPz1100 on July 04, 2018, 10:20:16 am
^^What about LUA scripting from the auto provisioning page and obi talk service from the voice services?
Those "shouldn't" affect auto-update..........at least they haven't for me.
Those two additional steps will, I believe, disassociate your device entirely from the OBiTALK web portal.
GPz1100:
Got it. Different priorities. He just wanted the firmware to stop auto updating. I can't recall if it was on here or dslr, but it was mentioned even with the auto firmware update option disabled, obi was still able to push it through - possibly through the obitalk service.
billkcweb:
Quote from: Taoman on July 04, 2018, 10:00:24 am
If it keeps re-enabling itself it sounds like you're making the change from the local web gui and not from Expert Mode on the OBitalk web portal. Make the first two changes listed below from the OBitalk portal and the last one from the local web gui on your OBi.
System Management >> Auto Provisioning:
Auto Firmware Update >> Method: Disabled
ITSP Provisioning >> Method: Disabled
OBiTalk Provisioning >> Method: Disabled (disable from local web gui, not OBitalk portal)
Perfect, thank you very much! You were correct, I was making all of the changes from the local web portal. When I did as you described, it did indeed stop auto-updating and now I'm fixed, running on the 5859EX FW.
If anyone else wants to try this solve, the FW I'm now using is:
http://fw.obihai.com/OBi202-3-2-2-5859EX-198839.fw
gpslouis:
Similar problem here. Obi200 running 3.2.1 (Build: 5757EX). Incoming calls are fine. OBi and GV were working fine for several years until the last few days. I have power cycled Obi200, but not done factory reset.
Outgoing calls give only one ring to caller, then silence while waiting for called party to answer. Called party's phone rings repeatedly until phone is answered. Called party can hear caller, but caller cannot hear recipient.
Navigation
[0] Message Index
[#] Next page
[*] Previous page