Not able to hear the call receiver when I make outgoing calls using OBI110 and G
Engineering:
Update: Yesterday, my box's firmware was updated automagically to 3.2.2 (Build: 5859EX). It's actually a "downdate" from 5897EX, the type you can't do yourself anymore because the firmware doesn't allow it. Anyway, since they changed the firmware, the problem has gone away so I seem to be able to call all numbers fine.
NoStep:
Same here, outgoing calls now fully functional. I am not able to see the version number, so can only assume mine matches others now.
lrosenman:
go into obiexpert, and look at the status page. It'll have the version, or log in to the local web interface (the Obi's IP address), with id=admin, password=web password you set on the portal (I believe it defaults to admin) and look at the status page.
+
SteveInWA:
...or, pick up the OBi-attached phone, and key in ***0 then 1# to hear the firmware version read back to you.
GIOS:
I have a OBi508 and I have tried multiple factory resets, and device resets however I cannot hear any audio from outgoing caller. In coming calls are working perfectly fine. I am running software version 4.0.5 Build: 5872EX. I am having similar issue can anyone assist or has anyone found a solution. Thanks Robert
Navigation
[0] Message Index
[#] Next page
[*] Previous page