News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Update Manual to reflect Voice Gateway Nat Traversal Options

Started by MB.., August 28, 2011, 04:23:41 PM

Previous topic - Next topic

MB..

I read at
http://www.obitalk.com/forum/index.php?action=printpage;topic=526.0

That:
Firmware Release 1.2.1(2283) has been posted. One enhancement includes is the
addition of options to support NAT traversal for SIP Gateway and URL calls
on SP1/2: You can now append the following URL parameters to each speed dial and
SIP Gateway VG1-8 access number, separated by ';',
   - ui=userid[:password] 
         user-info, password is optional
   - op=[ i ][ m ][ n ][ s ]
         option flags, i=ice, m=symmetric-rtp,
         n=use-natted-address, s=stun

Examples:
   SpeedDial = sp2(1234@sip.inum.net;ui=1000:xyz;op=sm)
   VG1-8 AccessNumber = SP1(sip.inum.net;user=1000;op=imns)
   Note that if userid or password is specified in VG1-8 AccessNumber,
   it overwrites the settings in    AuthUserID, and AuthPassword in the VG.
   If stun disabled in the main SP, then stun client is not enabled,
   and may lead to crash when doing URL dialing and stun specified.

It would help if this information was actually in ObiDeviceAdminGuide.pdf


MB..