OBI 110 Die Hard
wpollock:
So shoot me for not upgrading to a 200 series yet. Why is it that i can't complete calls to toll free numbers such as 888,866 etc..? There is a dial tone,I make the call,the number rings but when it is answered the call drops. I can call non-toll free numbers without any issue.
Has this happened to others?
drgeoff:
We'll shoot you for not saying which ITSP you are using.
And what's with the double post? Did you do that or has the forum software another wobbly. (Attachments are not working.)
wpollock:
ITSP is AT&T Uverse and I use google voice.As for the double post I feel fairly certain I only clicked post once and was somewhat perplexed when i saw a double post show up. Sorry for any consternation
azrobert:
Some tollfree numbers will not work with GV.
I believe this has been fixed with the new GV.
You can setup VG1 with a free tollfree service.
Dial 18005551212 to route tollfree numbers to VG1.
Dial 800555121 to route tollfree numbers to GV.
The Profile A digit map assumes only N.America and 011 international.
Use OBi Expert to make the following configuration changes:
Service Providers -> ITSP Profile A General -> DigitMap:
(8(00|88|77|66|55|44|33)xxxxxxx|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.S3)
Physical Interfaces -> Phone Port
Add this to the beginning of the OutboundCallRoute:
{(Mvg1):vg1},
Voice Services -> Gateways and Trunk Groups -> Voice Gateway 1
Name: Tollfree
DigitMap: (18(00|88|77|66|55|44)xxxxxxx)
AccessNumber: sp2(tf.arctele.com)
AuthUserID: 4805551212
The person receiving the call will see AuthUserID as your CallerID.
The above assumes SP2 is defined with a SIP provider.
If not, define a dummy provider:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer: 127.0.0.1
Voice Services -> SP2 Service -> AuthUserName: anything
Voice Services -> SP2 Service -> X_RegisterEnable: unchecked
Voice Services -> SP2 Service -> X_ServProvProfile: B
If you have a 2nd GV account defined on SP2, you are SOL.
wpollock:
Well perhaps I am out of luck regardless because SP2 is configured to Google Voice and SP1 is not configured. And excuse my ignorance for not knowing the shorthand when I ask what you are referring to by VG and VG1?
Navigation
[0] Message Index
[#] Next page