Direct international outgoing calls to Sp2

(1/2) > >>

sportflyer:
I have GV  for SP1 and Voip.ms for SP2 .

Would international calls starting with 011 automatically be transferred to Sp2 if there is no money in GV?

If not what must I add to dialing plan in SP1 to use SP2 for 011.xx out going calls ?

drgeoff:
No, it will not happen automatically.

You can manually force use of SP2 by prefixing **2 to the number you dial, ie **2011.....

If you want to always use SP2 when you dial 011.... you need to change the Phone Port OutBoundCallRoute. Before the start of whatever is already there insert

{(011xx.):sp2},

sportflyer:
 Should  I make the changes  by logging into the device or use expert config in the obi portal ?   I suppose I have to uncheck  the default settings in order to add the suggested changes to Phone port?  Tks

drgeoff:
Quote from: sportflyer on July 07, 2018, 03:24:36 pm

Should  I make the changes  by logging into the device or use expert config in the obi portal ?   I suppose I have to uncheck  the default settings in order to add the suggested changes to Phone port?  Tks

As you mention GV you must have used the portal.  In which case use Expert mode there.  You need to clear both boxes at the end of a line to be able to make changes.

sportflyer:
Thanks.

Navigation

[0] Message Index

[#] Next page