Can't get settings to stay after reboot

[GVwatercao]

I'm using GV on SP1.  I've been trying to turn off VM indicator and stutter dial tone, and have unchecked MWIEnable, X_VMWIEnable, and MessageWaiting (individually and together, multiple times), submitted the changes, and rebooted (through the web portal, by dialing ***9, 1, and by turning off power), but each time it returns to the default with all the boxes checked. Any suggestions?  My firmware is updated.

[LeftRight]

If you configure everything through OBiTALK web portal, you need to enable auto provisioning -

System Management -> Auto Provisioning -> ITSP Provisioning -> Method

[jimates]

If using Obi Expert Configuration you should uncheck all 3 boxes for each item and click "submit" at the bottom of the page. Rebooting is not necessary when using expert config.

[RonR]

Voice Services -> Spx -> MessageWaiting

does NOT exist on the OBiTALK Web Portal and can only be manipulated in the OBi directly.

In order to make changes to the OBi directly and not have them overwritten by the OBiTALK Web Portal, you must set:


(f/w versions less than 1.3.0):

System Management -> Auto Provisioning -> Auto Provisioniing : Method : Disabled


(f/w versions 1.3.0 or greater):

System Management -> Auto Provisioning -> ITSP Provisioning : Method : Disabled

[jimates]

when I opened the portal in my browser it would only display a portion of the pages. I just assumed the same items were available from the expert config.

Really dumb to have an expert configuration without all the settings.

[GVwatercao]

Thanks for the help.  Now the lights on my phones won't be flashing all night long telling me I have a message waiting.