obi100 calling using googlevoice - digimap prepend

(1/2) > >>

nimbus22:
I have an obi100 connected to googlevoice. 

I can receive calls fine. 

When I dial out I get no audio but the called party can hear me fine.  This is a known problem since google stopped supporting xmpp.

A workaround is to call your own googlevoice phone number, enter 2, enter called phone number, enter #

Is is possible to use digimap to prepend this sequence to all phone numbers.  If so could you give an example.

Taoman:
I guess you didn't like my answer on DSLreports?

nimbus22:
I posted here about the same time I posted on dslreports.  So I didn't see your response.

Eventually I'll go to the obi200 but wanted to make sure there wasn't an easy workaround.

Thanks for the answer. 

vtsnaab:
Hi Taoman:
Quote from: Taoman on July 12, 2018, 10:50:04 am

I guess you didn't like my answer on DSLreports?

Might you post a link here to that thread please ??
Thanks.

Taoman:
Quote from: vtsnaab on July 18, 2018, 05:01:51 pm

Hi Taoman:
Quote from: Taoman on July 12, 2018, 10:50:04 am

I guess you didn't like my answer on DSLreports?

Might you post a link here to that thread please ??
Thanks.


Really don't think it's going to do much for you but here you go:

https://www.dslreports.com/forum/r32030741-OBI110-fix-for-one-way-audio-problem-can-t-hear-response-voice

Navigation

[0] Message Index

[#] Next page