Firmware 3.2.2 Build 5898) breaks PhonePower. Need to revert to 3.2.2 build 5757
jman19:
Hi all,
I have been running my config for a while now and everything seems stable. Madhouse, sorry for not replying sooner, as things have been a bit busy. I did get most of the config info directly from the PhonePower support people.
Meanwhile, does anyone know if the latest build mentioned (5921, I think) fixes the PP issues without a lot of manual configuration?
Abestock:
I've been on 5921EX for months now, working with PP. NO PROBLEMS. Without manually setup? Why do you think I posted the setup in the previous post. With PP support techs, you will get different answers from different people. I have my own Obi202 with the special deal that was available thru Obi to function on PP on one line/port only for a reduced price. After multiple Obihai provisioning failures, we discovered that the issue lay with Obihai by defaulting my unit because PP did not provide a template for my unit. Why, I used my own Obi202. So, a real knowledgeable tech along with myself went through every parameter and got it functioning. After many more months of use, I also added more tweaks. I've had no problems whatsoever on 5898 or the current 5921 version. It does require manual tweaking. And, I've carried mu Obi unit while on travel, plugging into different routers, different locations thru ethernet routers, service works perfectly. Only had to change NTP time server ip address for accuracy.
civilmann:
Hi all,
Update on this topic with Firmware 3.2.2 (Build: 5932EX) updated with a recently registered Obi200 Via Obitalk portal. Polycom (Obihai) did this to my newly registered device before notifying me via email without my permission mind you. However, this did work out for me in the end. This device was set up with just Google Voice on SP1 via Obitalk. I added Phonepower to SP2 by hand using Obitalk portal. I used the settings from Abestolk (Posted Sept. 27 2018) as a guide. There are some twists and turns with it but is working now for 2 days without stacked registrations on Phonepower. Google Voice is also working as it should. I used a Digitmap supplied to me bay Phonepower tech support (Thanks To Vince @ Phonepower!) here it is:
(**|[3469]11|0|00|1xxxxxxxxxx|<1>[2-9]xxxxxxxxxS0|*21|*50xxxx|*51xxxx|*52xxxx|*53xxxx|*54|*6[013569]|*6[27]xx.|*77|*[789]2xx.|*73|*74[0-1][0-9]*xxxxxxxxxx|*75[0-1][0-9]|*8[137]|90xxxx|*93|*96|011xx.|xx.|(Mipd)|[^*#]@@.)
Long story short 4 days later and many hours with Phonepower tech support with some help via email and auto firmware updates from Obitalk. I now am the owner of an up-to-date device that works the way the old device with locked firmware 3.1.2 (Build: 5997) that had quit functioning with Phonepower then Google Voice then after a reset just Phonepower would work. If you have one of these older devices locked in at firmware3.1.2 (Build: 5997) reset it. It will still work great for Phonepower only. You cannot use it with Google voice and my firmware would never update via Obitalk. The lesson here is to have a backup device new on the shelf unregistered with Obitalk & backup your configurations often! I know this is a bit much but it is what it is ::). I have not used Abestock's star codes as I don't need them just use *21 with my Phonepower to retrieve my voicemail. Thanks to all the above mentioned each played a role. If this is not clear message me I'll try to help.
youbecha:
I attempted the 27 sep setup. My obi is at 3.2.2 , I didn't realize the phonepower was screwed up because incoming calls worked just fine.
So I attempted this step.
Auto Provisioning - Auto Firmware Update - Method = Disabled
ITSP Provisioning - Method = Disabled
- ConfigURL = tftp://$DHCPOPT66/$DM.xml;$DHCPOPT66;
I can set the ITSP Provisioning to Disabled, and set all the other things in ITSP... after a reboot, the ITSP Provisioning is back to Periodic, and the Proxy addresses in the ITSP settings have changed back.
Any ideas?
drgeoff:
The one you needed to disable and didn't was Obitalk provisioning. But many prefer to keep that enabled and make configuration changes using Expert mode on the portal.
Navigation
[0] Message Index
[#] Next page
[*] Previous page