Firmware 3.2.2 Build 5898) breaks PhonePower. Need to revert to 3.2.2 build 5757
soobong:
Hello! I also have been using Obi110 for a very long time and all of a sudden, I am Offline so I was forced to purchase the Obi200. I tried to connect and register, but unfortunately, I failed. I had to ask phonepower for e-mail and they gave me all the instructions for the full hand config while the SIP Credential is open at phonepower,(which I did not have to before)... Anyhows, currently, I am trying to retry and after many tries, and to re-config and revert and resets, I still have no 100% connection with phonepower. Also, Phonepower is just waiting for obitalk to figure this problem, until then phonepower is asking too see if i can roll back to the previous firmware which there is no problem.
1. Anyone know how to roll back to previous firmware? I was able to download the previous firmware which is 3.2.1. 5757?
2. any good results? please share...
3. am i doing something wrong? Please help me!!!
Mango:
There have been no firmware updates to the OBi110 for months/years. The changes that require purchase of an OBi200 are only related to Google Voice, which does not affect you since you use PhonePower. Barring a hardware failure (lighting strike, power surge, etc) your 110 should still work.
Unless you're the same dude on DSLR under a different name, you are the second person who reports issues with the 110 as well as the 2xx's new firmware. Conspiracy theory: PhonePower made some fundamental change to how their switches work and this is not an Obihai problem at all.
Until someone does a SIP trace to find out exactly why their setup is failing, any troubleshooting will be a shot in the dark.
soobong:
Hello
Thank you for the reply...
Yes, I have no problems with Obi, I believe phonepower is saying that Obihai had updated firmware and it is causing the problem... that Obitalk/Polycom should fix the problem. Anyhoos, I am still stuck with no phone line... Boo Hoo Hoo... anyone else with any other thoughts. Please reply...
soobong:
Hello,
Anyone, who has the problem with Phonepower... about 5 minutes ago, I had Google voice setup in SP1 and Phonepower on SP2 with SP2 that has no re-configuration. It has been 7 minutes. I want to see how long it will last, but they only problem is that I have to keep SIP Credential open(why?, otherwise, the system will be disconnected...) maybe in about 30 minutes or so, i will try to close, i will share any results later. Currently, GV is Connected, phonepower is registered and I can make calls OK. did not try incoming calls yet.
soobong:
Hello,
Phonepower at SP2 and GV on SP1 is currently working A-OK, but the odd thing is that I have to keep SIP Credentials at Phonepower, why? I am going to try to shut down at 1 hour 1 min./ Currently, I have been on for 39 minutes.
Navigation
[0] Message Index
[#] Next page
[*] Previous page