Transfer from PSTN to another OBI
jerome:
Quote from: A_Friend on July 19, 2018, 08:54:51 am
Quote from: jerome on July 19, 2018, 06:31:19 am
I have
1 OBI110 with 1 Line and 1 voip
1 OB200 with 1 voip and 1 GV
how can I have when someone call to the PSTN to have the OBI110 rin and the GV attach to the OBI200
What do you mean by having "the GV attach to the Obi200?" What exactly are you trying to do? Why do you need to bridge these two devices?
I am trying to ring GV in USA the GV is SP1 in my OBI200 the Line (PSTN) is attach to a OBI110 in France
Jerome
azrobert:
GV is a provider. You can't "ring" GV. Do you want to ring the phone attached to the OBi200 or use GV to forward the call to another number?
jerome:
Quote from: azrobert on July 19, 2018, 09:07:05 am
GV is a provider. You can't "ring" GV. Do you want to ring the phone attached to the OBi200 or use GV to forward the call to another number?
yes that would work use GV to forward the call to another number?
A_Friend:
Quote from: jerome on July 19, 2018, 08:57:01 am
I am trying to ring GV in USA the GV is SP1 in my OBI200 the Line (PSTN) is attach to a OBI110 in France
Okay, I'm just guessing here, but if you're trying to bridge incoming calls on your FXO line so the caller can make calls in North America from France, using the Google Voice as an outbound line...
The trusted circle thing in ObiTalk is probably your best bet. I've never needed this so haven't any experience or advice regarding it. But, look into this first. https://www.obitalk.com/forum/index.php?topic=3094.0
It could be done without ObiTalk, but it's less seamless and depends on those voip carrier lines:
1) using the voip connections on each device, you'd forward the incoming call on the telco line on the 110 via voip to SP2 on the Obi200
2) set the inbound call route on SP2 to go to Auto Attendant
3) set up Auto Attendant to use SP1 as default
4) set up some sort of security to keep out the riff-raff, perhaps a code in Auto Attendant
jerome:
Quote from: A_Friend on July 19, 2018, 09:43:35 am
Quote from: jerome on July 19, 2018, 08:57:01 am
I am trying to ring GV in USA the GV is SP1 in my OBI200 the Line (PSTN) is attach to a OBI110 in France
Okay, I'm just guessing here, but if you're trying to bridge incoming calls on your FXO line so the caller can make calls in North America from France, using the Google Voice as an outbound line..
Not Only make a call from France (with trusted list), but also ring the GV on SP1 in OBI200 (USA)
Thank you
Jerome
Navigation
[0] Message Index
[#] Next page
[*] Previous page