Setting up with service from OnSip.com
OBiSupport:
Please contact our support team at support@obihai.com if you still experience the problem, and inform us the 9-digit number in your support ticket. We like to assist you on the registration issue.
kb_hunter:
All right. I contacted Obi support and with their help this issue is now resolved.
Thanks Obi support.
This is what I had to do:
The ones on the left are Obitalk names; and the ones on the right are onsip terminology. The ports can be left at the default number 5060.
What threw me off completely and not very intuitive were the username fields. I still don't know what URI means. But I can live with that for a while!
==============================
Proxy Server = getonsip.com
Outbound Proxy Server = sip.onsip.com
User Name = "Authentication username"
Password = "SIP Password"
URI= "Username"
==============================
QBZappy:
What is a SIP-URI? ( http://www.3cx.com/PBX/SIP-URI.html )
A SIP URI is the SIP addressing schema to call another person via SIP. In other words, a SIP URI is a user’s SIP phone number. The SIP URI resembles an e-mail address and is written in the following format:
SIP URI = sip:x@y:Port
Where x=Username and y=host (domain or IP)
Examples:
sip:joe.bloggs@212.123.1.213
sip:support@phonesystem.3cx.com
sip:22444032@phonesystem.3cx.com
The SIP URI standard has been defined in the RFC 3261 standard.
Navigation
[0] Message Index
[*] Previous page