Obi202 Google Voice Gateway Cisco 7941
McKayCR:
I did change it to false, thats the best result I get. If its set to true then the phone just keeps trying to register. I'm also trying to test with XLite with no success as well. If I got Xlite to work, I'd know it was an issue with the phone config.
azrobert:
Try Phonerlite on a PC
Download and install Phonerlite:
http://www.phoner.de/PhonerLiteSetup.exe
When you start Phonerlite I think a wizard will popup because no accounts are defined.
Proxy: 192.168.1.100:5083 (IP addr & Port of SP4 on the OBi202)
Click right arrow.
User Name: 1001
Click right arrow.
Change Profile Name: OBi202
Click check mark
Uncheck box next to Register
Save
Dial a number and click the green phone symbol.
You can use the keyboard to dial a number.
Click red phone symbol to hang up.
McKayCR:
Just for fun, I scanned the obi202 for open ports, specifically 5060 and 5063. I go nothing. This is all inside my LAN, so I'm not going through any firewalls that would block me. Could there be a setting on the Obi202 stopping traffic to 5063, the port I'm trying to use as my ProxyServerPort?
PhonerLite says Request Timeout, which is what prompted me to check the ports
azrobert:
Are you doing anything to block SIP Scanners?
Like:
SP4 Service -> X_AcceptSipFromRegistrarOnly: checked
Edit:
This shouldn't prevent inbound GV from working.
McKayCR:
Quote from: azrobert on July 22, 2018, 11:24:12 am
Are you doing anything to block SIP Scanners?
Like:
SP4 Service -> X_AcceptSipFromRegistrarOnly: checked
No sir.
Navigation
[0] Message Index
[#] Next page
[*] Previous page