If You Buy Premium Support, will the obi202 updates automatically install?

<< < (8/12) > >>

ascendedmind:
I did, but the what value is not clear:
- Dial ***0 from the phone connected to the OBi202
- Enter 30#
- Press 1 to Enter a New Value (does not indicate what value, I assume it does matter.
- Press 1# to Enable
- Press 1 to Save

drgeoff:
Quote from: ascendedmind on July 29, 2018, 10:33:52 am

I did, but the what value is not clear:
- Dial ***0 from the phone connected to the OBi202
- Enter 30#
- Press 1 to Enter a New Value (does not indicate what value, I assume it does matter.
- Press 1# to Enable
- Press 1 to Save


Read the whole FAQ.

ascendedmind:
Wow, it's like puling teeth from a shark to get a straight answer from drgeoff. I would not have asked if I read & understood it. Typically I have no issues, but this device is another story.

again, this does not explain or tell you what value to use.  Frustrating.

drgeoff:
Quote from: ascendedmind on July 29, 2018, 10:56:02 am

Wow, it's like puling teeth from a shark to get a straight answer from drgeoff. I would not have asked if I read & understood it. Typically I have no issues, but this device is another story.

again, this does not explain or tell you what value to use.  Frustrating.

The FAQ has it written in black and white. I quote:
---------
By default, web access to the Internet (WAN) IP address of the OBi202 is disabled. Accessing the Internet (WAN) IP will show, "The requested URL was not found!" or "The web page cannot be found" in your browser. Note: You may always access the web page from the LAN side of the OBi202, e.g. connect your PC to the LAN port of the OBi202. To enable access to the OBi202,

- Dial ***0 from the phone connected to the OBi202
- Enter 30#
- Press 1 to Enter a New Value
- Press 1# to Enable
- Press 1 to Save

---------

Why do you write: "This does not explain or tell you what value to use."

 "Frustrating" is the word that best describes trying to help you. No wonder SteveInWA walked away.

ascendedmind:
 OMG is #1 the new value? "Press 1 to Enter a New Value"

Navigation

[0] Message Index

[#] Next page

[*] Previous page