If You Buy Premium Support, will the obi202 updates automatically install?
drgeoff:
Quote from: ascendedmind on July 29, 2018, 11:13:29 am
OMG is #1 the new value? "Press 1 to Enter a New Value"
If you had read the whole FAQ you would have spotted the key difference between the enable and disable sections.
ascendedmind:
Sorry, I cannot relate to your style of communication via print. & I did read the complete FAQ for some reason I'm just not comprehending the FAQ. Not idiot proof for me.
ascendedmind:
I'm able to disable WAN, but not enable it.
Just repeats old value of 3.0.1.4350 & press zero to repeat this information!
Pressing 1# to enable does not work to enable. It's stuck at - Press 1 to Enter a New Value
"Dial ***0 from the phone connected to the OBi202
- Enter 30#
- Press 1 to Enter a New Value
- Press 1# to Enable
- Press 1 to Save "
Furthermore, I'm not able to access Alternatively, the OBi Expert Configuration page via the OBiTALK web portal to enable WAN access. This issue is totally nucking futz. Like a dog chasing it's tail & going nowhere.
There is no system management & no ability within this forum to upload screenshots, thus frustrating anybody who were trying to help me.
Then after telling me delete device, then told here to upload device in order to select OBi202. An exercise in futility, thus making me appear like a total ass clown. ::) This issue I'm experiencing has even tested others patience, thus just walking away...
- Select the OBi202 from the OBi Dashboard
- Go to: System Management - Device Admin
- In the Web Server area, you may enable AccessFromWAN by checking the available box.
drgeoff:
Quote from: ascendedmind on July 29, 2018, 01:36:41 pm
I'm able to disable WAN, but not enable it.
Just repeats old value of 3.0.1.4350 & press zero to repeat this information!
Pressing 1# to enable does not work to enable. It's stuck at - Press 1 to Enter a New Value
WTF are you on about?
The firmware version is not read out when you press keys to enable access to the onboard management interface via the INTERNET port.
ascendedmind:
FUBAR:
"The firmware version is not read out when you press keys to enable access to the onboard management interface via the INTERNET port." Does not work if I enable or disable WAN or use of Internet or WAN port as described very FAQ.
Internet or WAN port, results in "The webpage cannot be found" or The requested URL was not found!
This should be an easy fix, however it has turned very convoluted. >:( :( :-[
Navigation
[0] Message Index
[#] Next page
[*] Previous page