I have an OBI 100 with Anveo configured on SP1 for E911 service (it has no DID)
I have an OBI 200 configured on OBITALK to communicate with the OBI 100.
If I set the OBI 100/Physical Interfaces/PHONE Port/OutboundCallRoute == (<510111111*>(Mpli)):pp
I can make and receive calls via OBITALK on the OBI 100 phone.
If I set the OBI 100/Physical Interfaces/PHONE Port/OutboundCallRoute == (911S0|933S0):SP1
I can make 911 and 933 calls on the OBI 100 phone. 933 tested and works.
If I set the OBI 100/Physical Interfaces/PHONE Port/OutboundCallRoute == {(<510514856*>(Mpli)):pp},{(911S0|933S0):SP1}
I can make and receive calls via OBITALK on the OBI 100 phone but not 933 calls.
If I set the OBI 100/Physical Interfaces/PHONE Port/OutboundCallRoute == {(911S0|933S0):SP1,(<510514856*>(Mpli)):pp}
I can make 933 calls but not calls via OBITALK.
The tutorial suggests this should work, but isn't exactly clear. So what am I missing?
