News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

OutboundCallRoute configuration

Started by bill-cary, July 31, 2018, 10:07:05 AM

Previous topic - Next topic

bill-cary

I have an OBI 100 configured with Anveo on SP1 for E911 service with no DID.
I have an OBI 200 configured with a GV # and the OBI 100 and 200 configured for OBITALK.

If I set the OBI 100/Physical Interfaces/PHONE Port/OutboundCallRoute to:
(<510514856*>(Mpli)):pp  I can make and receive calls on the assigned GV #
(911S0|933S0):SP1   I can make 933/911 calls
{(<510514856*>(Mpli)):pp},{(911S0|933S0):SP1}  I can only make OBITALK calls
{(911S0|933S0):SP1,(<510514856*>(Mpli)):pp}  I can only make 933 calls

The Tutorial suggests that this is the way to accomplish this but isn't exactly clear.
What am I missing????????