800 calling through SipBroker (via CallCentric)
mo832:
Phone port digitmap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
Update: speed dial works as stated above. From keypad, just tried **1**275*18005551212, and it worked also. But without the **1, it gives me the 404 error. (the voice tells me I dialed * * 2 7 5 * 1 8 0 0 5 5 5 1 2 1 2) . As far as I know, sp1 is my primary line. Where do I need to check this? Are there multiple places it needs to be entered?
azrobert:
Physical Interfaces -> Phone Port
On my OBi110 Primary Line is the 5th parm from top.
Error code 404 means NOT FOUND.
I think Callcentric or SIPBroker rejected the call.
Did you dial a valid 800 number?
You can check the call history to see if the call was routed out SP1.
Log into the OBi via the Web interface
Click Status
Click Call History
InetUser:
mo832 -> Check your PM
mo832:
@azrobert,
So I checked my call history. It sent the **275 calls to SP2 google voice, even though I have the digitmap set as noted. Something isn't right. As long as I FORCE sp1, either via **1 or SP1 in speed dial, it now works correctly, where it wouldn't even dial before. I guess the digit map helped there, but it still won't do right without dialing **1. And my primary line is confirmed to be SP1.
giqcass:
Quote from: mo832 on April 07, 2014, 06:38:35 pm
@azrobert,
So I checked my call history. It sent the **275 calls to SP2 google voice, even though I have the digitmap set as noted. Something isn't right. As long as I FORCE sp1, either via **1 or SP1 in speed dial, it now works correctly, where it wouldn't even dial before. I guess the digit map helped there, but it still won't do right without dialing **1. And my primary line is confirmed to be SP1.
**2 is to force SP2 that is why SP2 makes the call.
Navigation
[0] Message Index
[#] Next page
[*] Previous page