800 calling through SipBroker (via CallCentric)
giqcass:
Now that you mention it if I remember correctly x should only match a number. I forgot that. There is obviously some information about his setup we are missing.
Do you find tf.callwithus.com superior in any way? I have never had issues with ideasip services but I can't confirm whether they support the new 844 code. I can confirm Sipbroker does support it. There are a lot of options out there for 800 termination and with the few 800 calls I make it's difficult to declare one better then the others.
mo832:
I checked my profile B, and it is the default and it matches the digitmap posted by azrobert above. I have posted my Profile A strings (and tried the modifications given) and my Phone port string.
I am using sp1 with CC (as stated) and currently using sp2 with GV, so I cannot use any free slots on 2 , correct?
I don't really want to do the global solution just yet, but I would like to be able to just dial an 800 number without the **1. Can you guys help me find what is causing the **2(75) to go to sp2 even though I have a pattern to catch it?
EDIT:
If I do the change that is given above
"What ever the reason it's being forced out SP2, you can fix it by placing the following at the beginning of the Phone Port OutboundCallRoute:
{(Msp1):sp1},"
What will this do to other numbers that I may dial? Would everything be forced to sp1 even when I don't expect it?
azrobert:
If you are using the default Phone Port OutboundCallRoute it won't cause any problems.
With the default you must dial **n prefix to route a call to somewhere other than SP1 (the Primary route).
The following is a better solution and won't affect anything else even if you don't have the default Phone Port OutboundCallRoute.
Remove **275*18(00|88|77|66|55|44)xxxxxxx| from the ITSP A DigitMap.
Do not use {(Msp1):sp1}, in the OutboundCallRoute
Add following at the beginning of the Phone Port OutboundCallRoute:
{(<**275*>18(00|88|77|66|55|44)xxxxxxx):sp1},
Dial 18005551212 and it will be routed out SP1 as **275*18005551212
azrobert:
Quote from: giqcass on April 07, 2014, 11:23:15 pm
Do you find tf.callwithus.com superior in any way?
I use tollfree.future-nine.com and tf.callwithus.com. With Future9 you must prefix the number with "**".
Both of these providers will use the UserID as the outbound CallerID.
proxy.ideasip.com does not send a CallerID.
proxy.tollfreenation.com, tollfreegateway.com, sip.denetron.com and sipbroker.com also send CallerID. I haven't use these recently, so I don't know if they still work.
I need CallerID when calling a few 800 numbers.
mo832:
so I tried the recent changes to the outbound call route, and dialed 18005551212, and I got the "number is invalid" message, which is from callcentric meaning I don't have credit.
I had already gone back to the original sp1 digitmap as instructed.
This is not going too easy for me :(
Navigation
[0] Message Index
[#] Next page
[*] Previous page