OBi200 - Reconfigure for New Google Voice
drgeoff:
Quote from: N7AS on August 05, 2018, 04:32:13 pm
I got my OBi200 updated to the latest firmware 3.2.2 (Build: 5898EX)
What I did was backup my OBi200 configuration as using OBi version. I imported it to OBiExpert and shortly I had the latest firmware.
From there I was able to get the SP2 and SP3 operational on the New Google Voice. I then got SP1 and SP4 working with 2 SIP Providers (Localphone and Callcentric).
I thought I would try the same method with my OBi1032.
I imported a backup OBi version to OBiExpert and set Auto Firmware Update to Periodically with the Interval left at 86400. I also set OBiTalk Provisioning to the same values. I even tried setting the Interval to 0.
So far no new firmware on the OBi1032. I am still at 5.1.7 (Build: 4666EX.1311). Is this a different breed of animal?
My 1032 didn't autoupdate from 4666 even after a reset to defaults. I manually loaded 4858EX.
N7AS:
@drgeoff
Where can I get 4858EX? I take it that it is the latest firmware?
A_Friend:
I think you at least want 5859EX for the Obi200. That will work with the new GV configuration. If you attach to the portal, it will probably upgrade you to 5898EX which is the latest.
But, if you just want to get started, the earlier one should work. You can download it here: http://fw.obihai.com/OBi202-3-2-2-5859EX-198839.fw
There's also this: obifirmware.com, which is not associated with obihai.com, where there is a recipe and unofficial firmware to configure your own GV without the portal. (Note: any official version of firmware past 5757ex will block you from loading this.)
N7AS:
Whoop-De-Do. Whoop-De-Do. I finally got the yellow triangle on the OBi-Dashboard for my OBi1032 and updated the firmware to 5.1.7 (Build: 4666EX.1311).
I now have the 5 Google Voice numbers working that was on Bill Simon's GVGW Gateway. The only thing that I did not like is that my Speed Dials were changed to the ones I used about 4 years ago before moving to Arizona. I just disabled OBiTalk Provisioning and was able to keep my present Speed Dials. I could not find anywhere on OBi-Expert to edit Speed Dials.
azrobert:
Quote from: N7AS on August 05, 2018, 11:21:33 pm
I could not find anywhere on OBi-Expert to edit Speed Dials.
Speed dials are found near the top of the left column of the Dashboard. There is only one set of speed dials and will be common for all your OBi devices.
Navigation
[0] Message Index
[#] Next page
[*] Previous page