Obi 202
Redw00d:
so, does ANYbodys 202 work with google voice? are you getting calls ringing IN? I'm curious.
I used a 110 for Many years... wonderful
bought a new 202... worked for.. about a week... :) I just want it to DO, as advertized... perhaps, these products should stop being sold, until they do as advertized? class action? hummmm
"Native Support for Google Voice™
From the telephones connected to the OBi202, anyone can make free calls in the USA and Canada. Users may also receive calls to their Google Voice phone number(s) and get new / unheard voice message notifications on the phones attached to the OBi202."
from their product page:
https://www.obitalk.com/info/products/obi202
so, please, chime in, is your working? or, have you just Given up?
thanks
GPz1100:
Many of us have functioning devices with the new gvsip platform.
There are many many factors that go into making it a functional system including gv account settings and obi device settings. Because of so many variables, the typical tactic is to factory reset and start over. I believe other threads/posts gave you direction.
With respect to inbound calls, does obi call history indicate the call is received? If so, then it's a setting that needs adjusting to tell the obi device which phone port to ring.
If obi call history has no record then need to figure out why the call is not being received. Likely an incorrect gv account setting.
azrobert:
Quote from: Redw00d on August 07, 2018, 10:36:17 am
bought a new 202... worked for.. about a week...
If your 202 worked for a week, maybe you have a hardware failure. You should be able to get a replacement.
Redw00d:
Quote from: azrobert on August 07, 2018, 10:52:34 am
Quote from: Redw00d on August 07, 2018, 10:36:17 am
bought a new 202... worked for.. about a week...
If your 202 worked for a week, maybe you have a hardware failure. You should be able to get a replacement.
hey Robt, thanks... well, my 202 worked Correctly, for a week, ie: incoming calls rang, and able to pickup phone and use... than...
withOUT changing any settings... I can now ONLY use those phones to call out, they do not ring...
so, do you think I might have a hardware failure?
thanks!
Redw00d:
thank you GPz,
so, with New 202, all features worked... then.... incoming calls stopped, but, I can call out so?
and, I had NOT changed anything, on MY end... so...
could you pls address these two issues, and I will attempt to repair them:
"With respect to inbound calls, does obi call history indicate the call is received? If so, then it's a setting that needs adjusting to tell the obi device which phone port to ring.
How pls? I do believe history shows, can you tell me how to check, and, what to adjust. thank you
"If obi call history has no record then need to figure out why the call is not being received. Likely an incorrect gv account setting. If this, could you explain fix pls?
ok, thank you so far for replies... I have a question, are you guys all "Volunteers" ?
thanks so much!
Quote from: GPz1100 on August 07, 2018, 10:46:18 am
Many of us have functioning devices with the new gvsip platform.
There are many many factors that go into making it a functional system including gv account settings and obi device settings. Because of so many variables, the typical tactic is to factory reset and start over. I believe other threads/posts gave you direction.
With respect to inbound calls, does obi call history indicate the call is received? If so, then it's a setting that needs adjusting to tell the obi device which phone port to ring.
If obi call history has no record then need to figure out why the call is not being received. Likely an incorrect gv account setting.
Navigation
[0] Message Index
[#] Next page