August 16, 2018, 09:19:49 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: help  (Read 100 times)
transam98
Full Member
***
Posts: 108


« on: August 09, 2018, 05:28:46 pm »

So I have a problem.. Obi 508 (basically the same as a 20X)..

Anyways doing the trick (for CALLER ID NAME ETC..) Of Call Centric and Google voice...

PICS BELOW..

When I DIAL Out on the Phone that is connected to JACK 4/SP4 it is dialing out on CALL CENTRIC (NOT GV)... it USED to dial out on GV..

It USED TO WORK FINE and I hadnt changed anything...
Then GV did this big changeover etc. and screwed up a lot.

It hasnt been the same since ! Any help/suggestions would be appreciated..

p.s.. I know  SP8 has NO Checkmark for outgoing.. there is NO PHYSICAL Phone connected to the SP8 JACK... just a FYI Smiley
Logged
drgeoff
Hero Member & Beta Tester
*****
Posts: 3557


« Reply #1 on: August 10, 2018, 01:57:03 pm »

When I DIAL Out on the Phone that is connected to JACK 4/SP4 it is dialing out on CALL CENTRIC (NOT GV)... it USED to dial out on GV.
JACK 4 is not "hard wired" to SP4 for either inbound or outbound calls.  Check which SP the Phone Port 4 Primary Line is set to.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC