October 16, 2019, 11:39:01 pm *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: OBI212 and FreePBX/IncrediblePBX  (Read 4474 times)
KenGetz
Newbie
*
Posts: 5


« on: August 12, 2018, 10:49:28 am »

I've set up an OBI110 for my PBX using the instructions here and it works perfectly:

https://wiki.freepbx.org/pages/viewpage.action?pageId=4161592

I need both the FXO and FXS ports: I have a POTS line I need to connect to, plus an IP-based PBX that manages phone calls here.

Given that the Obi110 is very old, and isn't supported, I purchased an OBI212, since it had both an FXO and FXS port. I tried following the same instructions. Although it worked more or less, it certainly wasn't working enough to use, and I don't understand the settings or configuration enough to make it work.

Has anyone used an OBI212 to replace an OBI110, using a similar configuration? Even better, has anyone updated these instructions to work with an OBI212? I'm sure it can work, it's just that mine didn't.

Thanks! -- Ken
Logged
drgeoff
Hero Member & Beta Tester
*****
Posts: 4427


« Reply #1 on: August 12, 2018, 11:16:51 am »

Please delete all the other duplicates of your post so that all replies are in this thread.

Please give more precise details of what is not working well enough.
Logged
KenGetz
Newbie
*
Posts: 5


« Reply #2 on: August 12, 2018, 11:48:27 am »

Thanks. Removed. I got an error each time I tried to post, so I kept trying, and figured none of them had ended up online!

In any case, my hope was that someone had modified those old instructions for an Obi212. I don't remember now what failed. I can try again and post results here, if anyone is interested. But if someone does have it working, would love to hear about it! Thanks.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC