The number you dialed, has not received a response from the service provider?
JM51:
Is there any update to this?
Having issues with Google Voice and Obi suddenly. The phone number works fine in Google itself.
I followed the above instructions and changed the Google credentials, making sure everything was updated. It worked for a minute. And then right after, any outgoing call reverts to "The number you dialed..."
Calling the echo line **9222222222# works, and all the 3 lights on the device are green and static (though the middle one, internet, occasionally blinks really quickly, not flashing, but a quick blink, as if indicating in use).
What else can I check? I updated the firmware as well.
CALYTA:
Quote from: B0b. on August 15, 2018, 08:30:07 pm
Quote from: A_Friend on August 15, 2018, 07:32:21 am
All I can offer you is s xender discord omegleome speculation and maybe a couple of things to try -- a shot in the dark, so to speak.
Thanks for the help!
I'll look at the ICE/Keep-alive/times on the OBi. Do you know where these are or what to try when setting them?
The only thing I quickly found when looking at the Internet settings on the configuration page is PPPoEKeepAlive set to 60.
I'm getting a Wi-Fi adapter in the mail tomorrow to try to connect the OBi directly to the hotspot and bypass the router.
I already have the same GV account set up on my laptop and spare cell phone that is connected to Wi-Fi and these always ring and can make outgoing calls.
I'll look into getting a SIP account from another provider, but I'm hoping to stick with GV. A cellphone is available to use 911, but it has a limited amount of minutes for other calls, and I would prefer to use the landline handset to make calls at the house.
I finally tried removing all devices from my Google Voice account then deleting the Google Voice account from the OBi200 Box then resetting everything up, but I got the same results. I think the software is up to date at 3.2.2 (Build: 5898EX). I have an Asus AC-1900 router and the OBi200 is connected to it by Ethernet. Do you have any suggestions on what to try to be able to reliably receive incoming calls and make outgoing calls without restarting the OBi200?
drgeoff:
Firmware 5921 is available via a sticky thread in the firmware section of the forum but I offer no opinion on its effectiveness for your problem.
Summest:
This post was largely a waste of time, but I think whoever said to reset the password could have been onto something.
Instead of doing that I added GV to SP3 and updated the configuration to match. Voila.
I can call in and out once again and I am hardwired and have been the whole time. Let us see how long this lasts.
Minephue:
Quote from: JM51 on October 21, 2019, 04:07:53 pm
Is there any update to this?
Having issues with Google Voice and Obi suddenly. The phone number works fine in Google itself.
I followed the above instructions and changed the Google credentials, making sure everything was updated. It worked for a minute. And then right after, any outgoing call reverts to "The number you dialed..." FMWhatsApp Apk
Calling the echo line **9222222222# works, and all the 3 lights on the device are green and static (though the middle one, internet, occasionally blinks really quickly, not flashing, but a quick blink, as if indicating in use).
What else can I check? I updated the firmware as well.
why don't you isolate the hotspot and see how that's performing on its own?
Navigation
[0] Message Index
[#] Next page
[*] Previous page