The number you dialed, has not received a response from the service provider?
Dmitry:
Quote
ou then need to unclick the check marks under "OBiTALK Settings" for:
"DefaultGateway"
"DNSServer1"
"DNSServer2"
The check mark of the above 3 items will switch to "Device Default"; unclick those as well.
Default gateway is the IP of your home/business router
DNSServer1 I set to: "1.1.1.1" and DNSServer2 I set to "8.8.8.8"
You do not need to change Default Gateway
Just set
DNSServer1 to 1.1.1.1
DNSServer2 to 8.8.8.8
Wait few minutes and it will work.
0biWanKenobi:
Quote from: SamirLatif on June 12, 2021, 04:07:57 pm
Looked around other website and this instructions worked for me. Copy and pasting it here for the rest. Hope this will resolve the same issue that I have:
Here's what I managed to do to get both my Obihai devices (200 & 202) "connected" and working again. (Yes, I suffered from the "registration not required", as well as the "token", issues).
In the Obitalk home page, select the desired device ... and then click "OBi Expert Configuration". Confirm that you actually want to go to that screen.
Then click "Enter OBi Expert"
On the left panel, under "Production Information" select:
SYSTEM MANAGEMENT » WAN Settings → or ←
ROUTER CONFIGURATION » WAN SETTINGS (menu changes between 200 & 202)
You then need to unclick the check marks under "OBiTALK Settings" for:
"DefaultGateway"
"DNSServer1"
"DNSServer2"
The check mark of the above 3 items will switch to "Device Default"; unclick those as well.
Default gateway is the IP of your home/business router
DNSServer1 I set to: "1.1.1.1" and DNSServer2 I set to "8.8.8.8"
Save the settings and then reboot your device.
Changing the Default Gateways ... and indicating the proper DNS servers to utilize brought me back to up-and-running; hope it does the same for you!
This worked. Thanks!
AlexForaza:
When I am getting to SYSTEM MANAGEMENT » WAN Settings, there are no
"DefaultGateway"
"DNSServer1"
"DNSServer2"
What am I doing wrong?
MSRobi:
Quote from: AlexForaza on June 13, 2021, 02:25:46 am
When I am getting to SYSTEM MANAGEMENT » WAN Settings, there are no
"DefaultGateway"
"DNSServer1"
"DNSServer2"
What am I doing wrong?
Try "Router Configuration" instead of "System Management". And don't bother changing DefaultGateway, just the DNSServer1 and DNSServer2.
drgeoff:
http://www.obitalk.com/forum/index.php?topic=18329.msg108740#msg108740
Navigation
[0] Message Index
[#] Next page
[*] Previous page