how to make a new call using speed dial from AA

<< < (3/3)

gweng:
Quote from: RonR on September 08, 2011, 08:55:56 pm

gweng,

You should be able to make reliable calls to **9 222 222 222 with the OBi at factory defaults and not configured in any way.  If you're unable to accomplish this, I would suggest you temporarily connect the OBi to your broadband modem and see if it if then works properly (power-cycle both the modem and the OBi after making the connection).  If it does, then your router is likely the source of your problem.  If you still get cut off with no router in the loop, it's beginning to sound like the OBi is suspect and you need to contact Obihai support for assistance.



I have another obi100 have not upgraded fireware and it works fine now. Is there any way to revert fireware back to the previous version?

QBZappy:
gweng,
   
Refer to this thread:

OBi100/110 Device Firmware (Previous Supported Release)
http://www.obitalk.com/forum/index.php?topic=873.0

you wish to down-grade from the most current supported release, please see the following instructions.

WARNING: If you have updated your OBi with release 1.3 or above you will not be able to downgrade your OBi using the below procedure.  Please contact support@obihai.com if you have any questions.

Download the firmware from the link below and follow instructions to manually update the OBi using a PC's browser opened to the OBi device management web page.

http://www.obihai.com/firmware/OBi-1-2-1-2289.fw  (2MB)

Navigation

[0] Message Index

[*] Previous page