Obi110 can call out, but can't receive incoming calls

(1/3) > >>

buhuo:
I have registered Freephoneline, and setup it to SP1. Now Obi110 can call out, but can't receive incoming calls. I have other ATA config file, but there is no Obi110 config file.

http://forum.freephoneline.ca/viewtopic.php?f=15&t=310

This is for the PAP2T-NA, but I can't setup OBi110 according to this file because I am a new comer.

buhuo:
I figured out that Freephoneline uses G729a. How can I setup this?

RonR:
What is the problem receiving calls?  Does the phone not ring?  Do you have one-way audio or no audio either direction?

If you can successfully make calls with Freephoneline, the codec is not likely the problem.

buhuo:
I'm in Canada. I set SP1 for Freephoneline, SP2 for another service provider. Primeryline is SP2 and SP2 is OK. SP1 can call out,but there is no ring when calling this number.

onecanobi:
have same problem here.
gv on sp1 works fine
fpl on sp2 will work outgoing, but not incoming calls.

even tried using stun server, no resolution.

Navigation

[0] Message Index

[#] Next page