Obi110 in United Arab Emirates

<< < (2/5) > >>

RonR:
Hopefully, these are the only changes you need to make to either OBi:


OBi #1

Voice Services -> OBiTALK Service -> InboundCallRoute : {200000002>(Mvg3):vg3},{ph}

where 200000002 is the OBiTALK number of OBi #2


OBi #2

Physical Interfaces -> PHONE Port -> OutboundCallRoute:

{(<+:2*>xx.):pp},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},
{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Physical Interfaces -> LINE Port -> DigitMap : (26xx.|<+>0[1-5]xxxxxxxx|<+>00919xxxxxxxxx)

User Settings -> Speed Dials -> 2 : PP(ob200000001)

where 200000001 is the OBiTALK number of OBi #1

Riyas:
RonR,
Thanks for your help. I've followed your instruction.
If I dial speed dial 2 from Obi#2, it wasn't working (No service available). Then I've added **9 before obi number (**9 200000001). Now call gets connected to Obi#1.

But If dial 0177755xxx from Obi#2, it's not working. It rings my Obi#1. Here my call history.

Call 1      09/17/2011                   12:49:58   
Terminal ID   PHONE1         P2P1
Peer Name      
Peer Number   2*0177755xxx         2*2*0177755xxx
Direction          Outbound                      Outbound
12:49:58          New Call   
12:50:08         Call Connected
12:50:27         End Call

What I want is, If my friend in Dubai dials 0177755xxx, it will go through my VG3 (One stage dialling).

Thanks

RonR:
I screwed up.  Try the revised OBi #2 settings.

Sorry 'bout that!

Riyas:
RonR,

Thanks again for your help. Unfortunately, I still have the same problem. When I dial 0177755xxx or 00919xxxxxxxxx, my call is ringing at Obi#1 (Obi in France).

Terminal ID        PHONE1                 P2P1
Peer Name      
Peer Number   +0177755xxx   2*0177755xxx
Direction           Outbound                   Outbound
23:14:05   New Call   
23:14:11   Call Connected
23:16:11   End Call

I don't know if I need to do anything on Obi#1...

I've also looked at your post here : http://www.obitalk.com/forum/index.php?topic=1103.0

Can this method work for me ?

Sorry for troubling you again and again.

RonR:
Quote from: Riyas on September 17, 2011, 11:57:59 am

I don't know if I need to do anything on Obi#1...


Did you configure this in OBi #1 (the OBI with VG3)?:

Voice Services -> OBiTALK Service -> InboundCallRoute : {200000002>(Mvg3):vg3},{ph}

where 200000002 is the OBiTALK number of OBi #2

Make sure you have the right OBiTALK number for OBi #2 in place of 200000002.

The Call History in OBi #2 (Dubai) looks correct now.  For some reason, the InvoundCallRoute rule in OBi #1 isn't matching the OBiTALK number or the outgoing call pattern.  What does the Call History in OBi #1 show when the call goes to the PHONE Port instead of VG3?

Navigation

[0] Message Index

[#] Next page

[*] Previous page