News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Wall Mounts for OBi200 and OBi202

Started by N7AS, October 01, 2018, 11:52:13 PM

Previous topic - Next topic

N7AS

If anyone is looking for a Wall Mount for their OBi200 or OBi202, you can have it 3D Printed.

OBI200 VOIP wall mount
https://www.thingiverse.com/thing:2840730

Obihai Obi200 Mount
https://www.thingiverse.com/thing:1959282

And for the OBi202

Obihai OBi202 Mount Box
https://www.thingiverse.com/thing:2813633

Obihai OBi202 with mounting tabs
https://www.thingiverse.com/thing:2975716

If you do not have a 3D printer. I don't so you can click on a link that says "Order This Printed" to have the 3D model printed.
There are 3 choices, but I would select TREATSTOCK as they have the best prices.

I had the first item above printed and it was delivered in 5 days.

I used a 3M Command Strip to attach it to the side of a cabinet.

Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.

SteveInWA

Why?

The devices already have keyholes on the back for wall mounting.

N7AS

#2
Quote from: SteveInWA on October 02, 2018, 04:54:20 PM
Why?

The devices already have keyholes on the back for wall mounting.

But not the OBi200. Some people may not want to drill holes for screws to mount the OBi202

Grant N7AS
Prescott Valley, AZ
https://www.n7as.com

A journeyman electrician sent his apprentice with a 5-gallon bucket and was told to put the ends of the service drop in the bucket and fill it with volts. He was there all day.