Hi All....
I previously had trouble setting up OBIwifi at a rental home, with no direct ethernet access. So I brought the Obi200 and the obiwifi back to my home, and configured the OBi 200 via direct connection to my router. And I got the Obiwifi working on my home wireless network.
Question: I want to move the obi out to this other house, where there is an open wireless network (no password), and where there is NO access to plugging into an ethernet port (internet service has to get beamed in). I am asking because I want to avoid driving way out there and not be able to make this work.
What are the steps I need to take to get the obiwifi working out there?
1) plug in obi200
2) plug in obiwifi dongle
3) ?? will be looking for home wifi... need to reset obiwifi I assume? But DONT want to reset Obi200
I see the little reset button flush on the obiwifi dongle, should I for instance hold it down while plugging it in, then go looking for the obitalk wireless network? Then try and reset the obiwifi to the new wireless network? This is where setup gets pretty weird in my experience.
Pls advise exact steps and tips, so I dont waste the long drive out!!
I couldnt find anything online about resetting the obiwifi dongle itself.
Thanks!