Obi 202 plus Cisco 7960 error 405
zapattack:
When you say 'hang'
what does the call history log show?
Is there a From and To entry?
Did you do a Factory Reset on the phone?
SPA Ext settings:
Use Outbound Proxy: xxx no Use OB Proxy In Dialog: xxx no
Register: xxx no Make Call Without Reg: yes xx
Register Expires: .... Ans Call Without Reg: yes xxx
Preferred Codec: G711u
Second Preferred Codec: G711a
Use Pref Codec Only: yes xx
Password is not used
cisco7960:
202 is 192.168.1.100
ip phone is 192.168.1.71
cisco7960:
Quote from: zapattack on October 24, 2018, 12:36:09 am
When you say 'hang'
when I make an outbound call on the VOIP device, it doesn't ring the number, doesn't get a busy signal immediately - just pauses, for about 20 seconds then times out.
Quote from: zapattack on October 24, 2018, 12:36:09 am
what does the call history log show?
not sure - where do I find this?
Quote from: zapattack on October 24, 2018, 12:36:09 am
Is there a From and To entry?
not sure - where do I find this?
Quote from: zapattack on October 24, 2018, 12:36:09 am
Did you do a Factory Reset on the phone?
yes - I did. (on the VoIP device, not the OBi)
Quote from: zapattack on October 24, 2018, 12:36:09 am
SPA Ext settings:
Use Outbound Proxy: xxx no Use OB Proxy In Dialog: xxx no
Register: xxx no Make Call Without Reg: yes xx
Register Expires: .... Ans Call Without Reg: yes xxx
Preferred Codec: G711u
Second Preferred Codec: G711a
Use Pref Codec Only: yes xx
Password is not used
apologies - Im not sure on the above. I can't determine what settings you're referring to as to which I should check/change?
azrobert:
Try the Phonerlite softphone for Windows. This works for me and several other people on the forum. If this works for you then you'll know the problem is with your phone setup and not the OBi or network.
Download and install Phonerlite:
http://www.phoner.de/PhonerLiteSetup.exe
Select English
Accept license agreement
Take all defaults
Create desktop shortcut
When Phonerlite starts for the 1st time a wizard will popup because no accounts are defined.
Proxy: 192.168.1.100:5063
Click right arrow.
User Name: OBi200
Click right arrow.
Change Profile Name: OBi200
Click check mark
Uncheck box next to Register
Save
Allow network access
Dial a number and click the green phone symbol.
You can use the keyboard to dial a number.
Click red phone symbol to hang up.
You don't need a mic for Phonerlite to work.
Edit:
I just tried this from scratch and had to uncheck all the codecs except G711u
azrobert:
Change the X_InboundCallRoute to: ph
Now make a call
Does the OBi202 phone ring?
If it doesn't the call isn't getting to the OBi202.
Navigation
[0] Message Index
[#] Next page
[*] Previous page