How to call out on SP3?

(1/1)

idahowayne:
Have Obi 202 connected to a 2 line phone. Phone Power on SP1, Google Voice on SP2. Have just added Anveo  on SP 3. Can receive calls on Anveo # and Obi has automatically given me distinctive rings , so all is well on the receive side.
How do I call out on the Anveo #? or on anything I may install on SP3 or SP4?

azrobert:
Prefix the dialed number with **2 to route to SP2.

You can get fancy and route 10 digits to SP1 and 11 digits to SP2 or route calls by area code. These will require config changes.

drgeoff:
Quote from: idahowayne on October 22, 2018, 11:32:03 am

Have Obi 202 connected to a 2 line phone. Phone Power on SP1, Google Voice on SP2. Have just added Anveo  on SP 3. Can receive calls on Anveo # and Obi has automatically given me distinctive rings , so all is well on the receive side.
How do I call out on the Anveo #? or on anything I may install on SP3 or SP4?

The default settings are that prefixing a number with **n, where n is 1 through 4, routes the call out on SPn.

Navigation

[0] Message Index