OBi1022 voice quality issues

(1/3) > >>

RRSRER:
Hi Everyone,

I've been enjoying my OBi1022 for over a year now and I've never had any issues in linking to my Google Voice.  i've noticed over the last week or so, when placing calls people other the other line cannot understand anything said to over the line.  They say I come in with extreme static.

I've noticed I have to power cycle the phone and it temporarily corrects the problem

Any suggestions what I can do to help this issue?

Thanks in advance,
Sergio

SteveInWA:
Hi:

That sounds like a hardware failure to me, unless your internet service has a problem.  There are no user serviceable parts inside the phone, but if you have a spare power adapter with the same voltage and amperage rating, you can try swapping it out to see if the problem goes away.

There are some simple things you can try to determine if it's a hardware problem or not.  Call **9 222 222 222 to reach the OBiTALK echo test.  Talk and listen to determine if the audio is clear or not.  Take your phone somewhere else, to a friend or neighbor's house, or to work, and see if the call quality is better - if it is, then you have an internet problem.

RRSRER:
Thanks so much for the suggestion.  I rean the echo test and there are no issues.  I can hear my voice just fine.
but i did recently restart my phone.

I will try again later on

Thank you
Sergio

J-of-OurIT:
I've had similar issues with a single phone on my network.

There are 6 phones that work perfectly, but the most used one winds up with slowed down, choppy audio at least once per day. Rebooting fixes the immediate problem, but the issue comes back.

I've replaced the phone (an Obi1062 over wired (pass through, then tried wifi, then replaced it with an Obi1022 on ethernet (pass through to pc), then added an ObiWiFi to the Obi1022 and tried running it over WiFi, today I put a switch in and am trying it over ethernet, but without the pass through - hopefully this configuration works)

does this seem related / any advice?

SteveInWA:
Don't use WiFi in a business environment.  Multiple users will degrade the signal quality required to have a clear call.  Use hardwired Ethernet through a switch.

Navigation

[0] Message Index

[#] Next page