Off Hook/On Hook issue

(1/1)

cheseco12:
Full disclosure, I'm a newbie to this,  I set up my Obi200 per instructions.  With the phone line plugged in to the device, the phone green light flashes and I have no dial tone.  When I open the Obi200 IP address under Status/PHONE Port Status, it shows the device is "off hook".  If I unplug the phone cord from the Obi200 the status shows "on hook".  I then plug the phone cord in again and I can get a dial tone on my cordless phone.  I can then make a call to my cell phone if I make the call within 10-15 seconds otherwise the phone goes dead as a normal phone does when left off the hook without dialing a number within a few seconds.
แทงบอลชุด
I can NEVER make a call from my cell phone to my cordless home phone that is connected to the Obi200. It says the wireless customer I called is not available.
สมัครแทงบอลชุด
Suggestions?

drgeoff:
Your first step should be to try another phone, preferably a standard corded one.

azrobert:
Don't use your house wiring, plug the phone directly into your OBi.

Navigation

[0] Message Index