How to setup Obi200 with an automatic voice dialer

(1/2) > >>

Alexicerink:
Hello, please help. I am trying to use an automatic voice dialer with my Obi200 and VOIP phone which also is an OBIHAI device. My setup is supposed to be linked to a monitor that displays temperature, once the temperature reaches a certain level its supposed to ring via automatic dialer, which previously was hooked to a landline. Now I am using an ObiHai VOIP desk phone and the Obi200 is connected to the automatic dialer. I tried to do a factory reset and re-add the OBi200 to the obitalk interface but I am getting a "this device is already connected to another account" my only goal is to be able to have the automatic voice be able to send out calls through the Obi deskphone.

Thanks

Sheffield_Steve:
Did you buy the Obi200 used (off of ebay)?

Alexicerink:
Bought new, as far as I can tell, from Amazon.

Sheffield_Steve:
I don't know then. But that's normally a sign that is a used unit that was not meant for retail sale as it's made for a VoIP provider and cannot be changed.

drgeoff:
@Alexicerink.

Were you able initially to add the Obi200 to the portal or did you get that error message the very first time you tried?

Navigation

[0] Message Index

[#] Next page