Help testing Google Voice

<< < (2/2)

jadog:
I think I may have just figured it out. I recently disconnected my Obi while moving some equipment and just now realized that I accidentally plugged it back into phone 2, instead of phone 1. Will post back if that corrects...

*** Edit ***

Ok, more information. When I connect into phone 1, I don't get any dial tone. I looked at the difference between Phone 1 and Phone 2 and found the following:

"PrimaryLine" for Phone 1: Trunk Group 1
"PrimaryLine: for Phone 2: OBiTalk Settings

Any clue what is going on with this? I tested Phone 2 by changing to Trunk Group 1 and following a reboot that line also stops giving a dial tone. Any clue what I'm doing wrong here?

jadog:
Ok, so after factory resetting my oBi 202, I started over fresh. I have configured everything like it was, and now when I dial 9 first, followed by a phone number, I get the following message:

"The number you dialed 9-706-843-131 has not received a response from the service provider".

So it doesn't recognize the purpose of the 9 at the beginning to direct it to SP4.

zapattack:
Check Status/Call History on the 202
to determine which SP was selected and what digits were sent.

jadog:
After another device reset, I re-instated my settings. Google Voice is now working again when I dial 9. Thanks for the help.

Navigation

[0] Message Index

[*] Previous page