GSIP+Incredible PBX+Obi1032--phone not connecting
FocusGuy:
Can anyone help me with what settings need to change to get GVSIP account that is already setup (the nerdvittles way) with my Incredible PBX to connect with my phone (Obi 1032) so I can start making calls? Thanks in advance.
azrobert:
What happens when you try a call? Any error codes?
Google again changed something on their servers. See starting here:
https://www.dslreports.com/forum/r32183189-
Why don't you define GV directly on your 1032?
Edit:
That link doesn't work correctly.
Try this link. It starts a few posts down:
https://www.dslreports.com/forum/r32016984-Asterisk-Google-Voice-SIP-testing-and-technical-discussion~start=1080
drgeoff:
Quote from: FocusGuy on November 12, 2018, 05:37:00 am
Can anyone help me with what settings need to change to get GVSIP account that is already setup (the nerdvittles way) with my Incredible PBX to connect with my phone (Obi 1032) so I can start making calls? Thanks in advance.
4 steps:
1. GVSIP account already set up as a trunk on the PBX.
2. The OBi1032 registered as an extension on the PBX.
3. An Outbound Route set up on the PBX to use the GVSIP trunk.
4. An Inbound Route set up on the PBX to send incoming GV calls to the extension number assigned to the OBi1032.
FocusGuy:
Step 2 is the one that I need the guidance for. How do I manage to do that? I have already done all the other steps. There are so many settings when I use the ip to connect to the phone. Or should I be using the obitalk expert setting in the web portal? Thanks for your responses. I will keep looking but I would appreciate help with getting the phone registered and connected to my PBX so I can use an auto attendant, try all the features (IVR), wait music, etc. and create a great testing environment.
drgeoff:
Quote from: FocusGuy on November 12, 2018, 08:30:47 pm
Step 2 is the one that I need the guidance for. How do I manage to do that? I have already done all the other steps. There are so many settings when I use the ip to connect to the phone. Or should I be using the obitalk expert setting in the web portal? Thanks for your responses. I will keep looking but I would appreciate help with getting the phone registered and connected to my PBX so I can use an auto attendant, try all the features (IVR), wait music, etc. and create a great testing environment.
You can use either the "Generic Service Provider" template on the basic portal or the Expert mode. You only need to fill in these three fields of the former:
Service Provider Proxy Server. The IP address of your PBX or its name if you have that in a local DNS server.
Username. The extension number which must match what you will use in the PBX. See below.
Password. Anything you like but must match what you will use in the PBX. See below.
On FreePBX create an PBX extension. Generic CHAN SIP device.
User Extension. Same as Username above. The Nerd Vittles Incredible PBX typically uses the 700 to 799 range.
Secret. Same as Password above.
Navigation
[0] Message Index
[#] Next page