GSIP+Incredible PBX+Obi1032--phone not connecting

<< < (4/4)

drgeoff:
Quote from: FocusGuy on November 14, 2018, 01:01:04 pm

From what I can gather from the CDR report the number is connected to the PBX but my phone is not connected. I have an outbound and an inbound route in the system. Where do I look next?

What happens when you dial any of the info numbers that are "resident" on the PBX? If the phone is connected you should be able to reach them - no trunk, no outbound route, no outbound route needs to be working for them.  The NV page you read to install Incredible PBX should have a list. Eg 4747 or 411 or 767.  Note that your OBi may take about 10 seconds to call these so either wait longer than that or add a # to the end of the number.

FocusGuy:
Quote from: azrobert on November 14, 2018, 01:22:53 pm

Login to the OBiTalk portal. Does it show SP1 Registered?

Just curious, do you live in the east valley?


It said registered while I was doing all that work on it .... I once lived in the East Valley (Mesa). How about you?

drgeoff:
GVSIP is dead. It's against GV Terms of Service. http://nerdvittles.com/?p=27274

azrobert:
Quote from: FocusGuy on November 20, 2018, 01:16:54 pm

I once lived in the East Valley (Mesa). How about you?


I live in Fountain Hills.

Asterisk GV_SIP is dead as noted by drgeoff.

You can define the GV trunk on the OBi1032 and then route calls between IncrediblePBX. This way you can get all the functions of the PBX, but the setup becomes more complex.
See:
https://www.dslreports.com/forum/r31997421-Asterisk-How-to-turn-your-OBi20x-device-into-a-SIP-to-GVSIP-bridge

Navigation

[0] Message Index

[*] Previous page