Enabling call forwarding remotely on land line

<< < (4/8) > >>

Shammi:
Hi there, I need help here. could not figure out how to get PSTN forwarded ALL calls EXCEPT from numbers with a set of patterns starting 254xxxxx forward to SP1

RonR:
Physical Interfaces -> LINE Port -> InboundCallRoute : {(254xxxxx):ph},{sp1(12345678)}

Numbers matching 254xxxxx will ring the PHONE Port.

All others will be forwarded to 12345678 using SP1.

VeryBigTiger:
Hi,
I have two Obitalk 110 and booth are connected to landlines. I would like to get one say "X" to forward calls that is coming on phone line to the second Obitalk say "Y". I logged into my web portal and changed the obi expert configuration of the "X" Obitalk > physical interfaces -> line and enabled forward unconditional and entered the Obitalk number **920.... etc.
Is this the correct format.
Do I need to reboot and how to do this remotely.

I understand that I can call the "X" Obi and press 2 then *72, and then enter the forward number ... is this correct and can it be done this way to forward it to the seconc obi "Y" with **9200...etc number.

your help is appreciated!

Joseph

 

RonR:
Quote from: VeryBigTiger on December 15, 2011, 01:49:27 am

I have two Obitalk 110 and booth are connected to landlines. I would like to get one say "X" to forward calls that is coming on phone line to the second Obitalk say "Y". I logged into my web portal and changed the obi expert configuration of the "X" Obitalk > physical interfaces -> line and enabled forward unconditional and entered the Obitalk number **920.... etc.
Is this the correct format.
Do I need to reboot and how to do this remotely.


OBi Expert Configuration (Introduction)

Quote from: VeryBigTiger on December 15, 2011, 01:49:27 am

I understand that I can call the "X" Obi and press 2 then *72, and then enter the forward number ... is this correct and can it be done this way to forward it to the seconc obi "Y" with **9200...etc number.


Star Code features can only be initiated from the telephone connected to the OBi PHONE Port and are effective only on that OBi.

VeryBigTiger:
Hi RonR,
thanks much for your reply!
as for the number formate that I enter in the the forward field ... can it be the Obi110 number?

Navigation

[0] Message Index

[#] Next page

[*] Previous page