Trouble setting up 2 SPs
QBZappy:
At this point I would reset to ATA to default. There is small hole you can insert a paper clip in the back of the unit. Press down for let's say 30 seconds. Sometimes starting over magically fixes things.
rvansmith:
Reset the Obi by holding the reset button for 30 seconds, and it did not fix anything. I ended up resetting it up and having the same results. I still can not connect to ObiTalk and can not get SP2 to connect properly.
MichiganTelephone:
You say you used Firefox but I wonder if you have any Firefox extensions that might be interfering with the process (for example the NoScript extension, which is a great idea except that by default it interferes with the operation of almost every web site out there). Or do you have any cookie blockers? Things like that might be why it's not working.
You could always download and try another browser, such as Opera, Chrome, Safari, etc.
rvansmith:
I installed FireFox just to do this. No plugins and no settings changes. I don't have any anti virus stuff and the firewall would be the one running in the UVerse router. If Windows 7 has a firewall built in the settings haven't been messed with.
MichiganTelephone:
Well, it was a thought. I won't tell you what I think about AT&T as an ISP because I'm sure you don't want to hear it, but if you have any friends that have cable modem service, you could always try temporarily taking your device over there and trying the **5 thing. I have a feeling you might have better luck.
Other than that, I'm out of ideas. Sorry.
Navigation
[0] Message Index
[#] Next page
[*] Previous page